Entries by Admin

The advantages and disadvantages of ceramic chip lined wear-resistant pipes

Features of ceramic chip lined wear-resistant pipes: Paste the ceramic sheet on the steel pipe with high temperature wear-resistant glue to play the role of wear-resistant. The pipe is generally white. Generally used for large diameter pipes   Advantages: ceramic patch wear-resistant pipes have good wear resistance (compared to spontaneous combustion) and long service life […]

Why choose ultra-high molecular polyethylene material as the material of the tunnel escape pipe? What are the installation standards?

Tunnel escape pipe   The escape pipeline used in the tunnel is made of ultra-high molecular weight polyethylene. The installation of escape pipelines in the tunnel is generally based on prevention and facilitates escape. The tunnel escape pipeline plays a role of secondary defense. The polymer escape pipeline is light in weight, easy to disassemble […]

What is the principle of the escape pipe setting?

What is the principle of the escape pipe setting? 1.Adequate ventilation, tunnel escape ducts and alarm facilities should be set up at the construction site as required. 2.Tunnel construction needs to implement a time-limiting system for operations, and the dangerous projects must be stopped at night. 3.In terms of tunnel escape pipeline support, the construction […]

What do you know about bimetallic pipes?

Introduction of Bimetal Wear-resistant Pipes The bimetallic composite pipe is a new type of wear-resistant pipe developed by our company. The outer layer of the straight pipe is made of ordinary steel pipe, and the high chromium cast iron is formed through the casting process. The inner lining is compounded. The outer wall of the […]

Manufacturing process of dredging sand pumping pipe

The daily application of dredging sand pumping pipes is mainly to discharge silt from rivers, lakes and other places. The accumulation of silt and salt in some river ports will affect the normal navigation of our ships. At this time, we need to The sludge is discharged by the dredging sand pumping pipe, which has […]

Knowledge about wear-resistant pipes

Wear-resistant pipes mainly include wear-resistant elbows, straight pipes, tees, small and small ends, square and round joints, reducing pipes and other structural parts, which are mainly used for pneumatic, pumping slurry and other material transportation pipelines. Because the conveying medium has the characteristics of high hardness, fast flow rate, and large flow rate, it can […]

Three minutes to understand the process of wear-resistant ceramic construction and the precautions of the construction process

General wear-resistant products are mainly used in severely worn industries such as thermal power, steel, smelting, machinery, coal, mining, chemicals, ports and docks; they can be installed in thermal power plants from small units of 50,000 kilowatts to large units of 1 million kilowatts. It can be installed and used in its coal conveying, pulverizing, […]

What is the production process of wear-resistant pipes? What are the advantages?

The wear-resistant pipe is manufactured by the self-propagating high-temperature synthesis-centrifugal method. That is, the seamless steel pipe is placed in the tube mold of the centrifuge, and a mixture of iron oxide powder and aluminum powder is added to the steel tube. This mixture is called the thermite in chemistry. After the centrifuge tube mold […]

What is tortoise shell net wear-resistant elbow?

Tortoise shell mesh wear-resistant elbow type name: heat insulation wear-resistant lining elbow. The composition of tortoise shell net wear-resistant products: steel body + tortoise shell net + pouring wear-resistant material Product production process: 1. Surface treatment: Blow off the floating dust and polish to remove the floating rust. 2. Welded tortoiseshell mesh: requires more than […]

Ceramic patch wear-resistant tube for power plant

There are two production processes for ceramic patch wear-resistant pipes for power plants: pasting process and inlay process   Ceramic chip type and thickness in ceramic chip wear-resistant tube: Mutual pressure 60*40, 50*40, 30*25 Mosaic 10*10*10, 10*10*5, 17.7*17.5*5, 17.5*17.5*10 Purity: 92, 95, 97, 99   There are two types of ceramic adhesives for the inner […]