wanna to buy high quality bs malleable iron pipe fittings-90°street elbow? www.tjdecho.com can sell you fast delivery bs malleable iron pipe fittings-90°street elbow, suitable for Malaysia , Indonesia , Vietnam , Thailand and other European countries . Purchase it !
The 90°street elbow is one kind of malleable iron pipe fittings with male and female thread, which can connect two pipe joints of the same nominal diameter to make the pipe can be turned 90 degree.
The 90 degree street elbow is suitable for medium and low pressure pipeline systems, whose nominal pressure is not exceeding 2.5 MPa and working temperature range is between -20 °C and 120 °C. It is mainly applied in water, oil, air, gas, steam system, etc.
BS STANDARD MALLEABLE IRON PIPE FITTINGS-90°STREET ELBOW
1. Description of Products
The 90°street elbow is one kind of malleable iron pipe fittings with male and female thread, which can connect two pipe joints of the same nominal diameter to make the pipe can be turned 90 degree.
Dimensions:
1/2” (DN15)-2” (DN50)
Design Standard:
ENTERPRISE STANDARD
Connection Standard:
ISO 7/1, GB/T 7306.2
Working Pressure:
PN16
Application:
The 90 degree street elbow is suitable for medium and low pressure pipeline systems, whose nominal pressure is not exceeding 2.5 MPa and working temperature range is between -20 °C and 120 °C. It is mainly applied in water, oil, air, gas, steam system, etc.
Material of Matching Products:
Q195, EN10255
Surface Treatment:
□Black
□Hot-dip galvanizing
□Hot-dip galvanizing+ Electroplated zinc
□Epoxy power painting
□Electroplated zinc
□Others would be available upon clients’ detailed request
2. DIMENSIONS
3. Performance
1) All fittings shall comply with the maximum permissible working pressure and temperature range given in the table. The pressure value between 120 °C and 300 °C is determined by linear interpolation. The normal temperature of the pipe is not lower than -20 °C. When used outside the specified pressure and temperature range, it should be negotiated with the manufacturer
2) The inside of the pipe fittings shall be able to withstand an air pressure of not less than 0.5 MPa, and the pipe fittings shall be completely immersed in the water tank for visual inspection without
