– stacked structure
-The mounting surface conforms to din24340 type A and iso4401
-With pressure gauge interface for bottom plate installation
-The mounting surface conforms to din24340 type D and ISO 5781
-It is used for oil circuit block installation
-Four pressure ranges
-Four adjustment forms: · knob, adjusting bolt with protective cover, scale lockable knob and scale knob
-Electromagnetic unloading valve
| Fluid | Mineral oil suitable for NBR and FKM seal | ||||
| Phosphate ester for FKM seal | |||||
| Fluid temperature range | ℃ | -30 to +80 (NBR seal) | |||
| -20 to +80 (FKM seal) | |||||
| Viscosity range | mm2/s | 10 to 800 | |||
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406 | ||||
| Max.operating pressure | Port A | bar | 315 | ||
| Max. setting pressure | bar | 50, 100, 200, 315 | |||
| Size | 10 | 25 | 32 | ||
| Max. flow-rate | version 10% | L/min | 40 | 80 | 120 |
| version 17% | 60 | 120 | 240 | ||
| Solenoid technical data | Refer to version WE6, normally close chooses 3WE6A9, normally open choose 3WE6B9 | ||||
| Installation | Optional | ||||
| Size | 10 | 25 | 32 | ||
| weight | DA | kg | Approx.3.8 | Approx.7.9 | Approx.12.3 |
| DAW | kg | Approx.5.3 | Approx.9.4 | Approx.13.8 | |
| DAC | kg | Approx.1.2 (If version DAWC, add 1.5 kg) | |||
| DAC30 | kg | Approx.1.5 (If version DAWC30, add 1.5 kg) | |||
MG/MK Throttle And Throttle Check Valve